边坡工程中压力分散型锚索施工技术 |
投稿时间:2011-06-10 修订日期:2011-06-10 点此下载全文 |
引用本文:袁波,吴国华,周富荣.边坡工程中压力分散型锚索施工技术[J].钻探工程,2011,38(10):70-73.YUAN Bo,WU Guo-hua,ZHOU Fu-rong. Construction Technology of the Pressure-dispersive Anchor Cable in the Slope Engineering[J]. Drilling Engineering, 2011,38(10):70-73. |
摘要点击次数: 1222 |
全文下载次数: 913 |
|
|
中文摘要:压力分散型锚索是一种新型单孔复合锚固体系,其在同一锚索孔中设置多个单元锚索,各单元锚索具有各自不同的自由长度和锚固长度,并通过预先的补偿张拉,使锚索的集中拉力分成为多个较小且荷载数值相等的分散压力分别作用于各单元锚索的锚固段上。结合330国道K17+440~695段路基边坡治理的工程实践,论述了压力分散型预应力锚索的施工工艺以及在施工及工程运行管理中应注意的一些要点。 |
中文关键词:边坡工程 压力分散型锚索 单孔复合锚固体系 差异补偿张拉 |
|
Construction Technology of the Pressure-dispersive Anchor Cable in the Slope Engineering |
|
|
Abstract:The pressure-dispersing anchor cable is a new type of single-hole composite anchorage system developed in recent years. Several unit cells are set in the same hole, each unit cell with different free length and anchor cable length. By the preliminary compensate tension, the concentration tensile of cable are divided into several small dispersive pressure with equal load value, which respectively acts on cable segment of each unit anchorage. With the engineering practice of slope treatment of K17+440~695 subgrade of 330 national highway, this paper discusses the construction technology of pressure dispersion pre-stressing cable and some key points which should be paid attention in the construction and engineering operation. |
keywords:slope project pressure-dispersive anchor cable single-hole composite anchorage system tension compensation for difference |
查看全文 查看/发表评论 下载PDF阅读器 |