高温纳米复合水泥的试验研究
投稿时间：2021-05-20  修订日期：2021-05-20  点此下载全文
引用本文：何鑫,王胜,张统得,等.高温纳米复合水泥的试验研究[J].钻探工程,2021,48(S1):227-232.
HE Xin,WANG Sheng,ZHANG Tongde,et al. Experimental study on high temperature nano composite cement[J]. Drilling Engineering, 2021,48(S1):227-232.
摘要点击次数: 278
全文下载次数: 285
作者单位E-mail
何鑫* 成都理工大学地质灾害防治与地质环境保护国家重点实验室，四川 成都 610059 hexin@stu.cdut.edu.cn 
王胜* 成都理工大学地质灾害防治与地质环境保护国家重点实验室，四川 成都 610059 wangsheng10@cdut.edu.cn 
张统得 中国地质科学院探矿工艺研究所，四川 成都 611734  
陈绍华 钟山区自然资源局，贵州 六盘水 553001  
陈礼仪 成都理工大学地质灾害防治与地质环境保护国家重点实验室，四川 成都 610059  
基金项目:国家重点研发计划“绿色环保冲洗液体系与废浆处理技术”（编号：2018YFC0603406）
中文摘要:针对地热开采过程中孔壁发生垮塌、漏失，而常规水泥基材料在高温条件下各方面性能恶化，满足不了护壁堵漏技术要求。采用理论分析和试验，系统地开展常规水泥材料的比较研究，筛选出多种材料及试剂进行正交试验，获得了优化配方。通过试验，以初始流动度、可泵期、凝结时间和抗压强度4个性能指标比较了普通硅酸盐水泥和G级油井水泥的抗高温性能，评选出适于研究的高温下性能相对稳定的水泥；针对高温下水泥性能衰退的问题，筛选了几种含硅材料与试剂，通过正交试验优化了配方，优化配方为：25%GS+0.6%SiO2 +0.3%JSS+1.5%SN+0.03%SC+0.3%纳米材料。性能评价结果表明，该配方流动度等性能满足一定施工要求，在高温下具有较好的抗压强度。
中文关键词:地热开采  护壁堵漏  水泥基材料  纳米材料强度衰退
 
Experimental study on high temperature nano composite cement
Abstract:As the hole wall collapse and leakage in the process of geothermal development， and the conventional cement-based materials deteriorates under the condition of high temperature， which can not meet the requirements of the wall protection and leakage control. A series of experiments and theoretical analysis were studied to solve such realistic problems. A variety of materials and reagents are selected for orthogonal experiment to obtain the optimal formula. Through experiments， high temperature resistance is compared between ordinary Portland cement and G-grade oil well cement in terms of four performance indexes of initial fluidity， pumping period， setting time and compressive strength， and the relatively stable cement suitable for research at high temperature is selected； In order to solve the problem of cement performance degradation at high temperature， several silica containing materials and reagents were selected， and the formula was optimized by orthogonal test. The optimized formula was as follows： 25% GS+0.6% SiO2 +0.3% JSS+1.5% SN+0.03% SC+0.3% nano material. The performance evaluation results show that the fluidity and other properties of the formula meet certain construction requirements， and have good compressive strength at high temperature.
keywords:geothermal development  wall protection and leakage control  cement-based materials  nano materials strength decline
查看全文  查看/发表评论  下载PDF阅读器