| 多分支水平井岩屑运移模型与实验研究 |
| 投稿时间：2023-07-09 修订日期：2023-10-18 点此下载全文 |
| 引用本文： |
| 摘要点击次数: 100 |
| 全文下载次数: 0 |
|
| 基金项目:两淮煤田地面定向多分支水平井高效钻进技术体系研究 |
|
| 中文摘要:随着多分支水平井及复杂结构井钻井技术的不断发展，井眼清洁技术面临着新的困难和挑战。如何解决复杂地质条件与复杂井型条件下的岩屑床问题，对于判断与处理井下复杂情况是当前钻井工程面临的重要科学问题之一。通过岩屑颗粒受力分析建立了岩屑运移环空临界流速模型；基于室内可视化岩屑运移实验，探究了岩屑运移影响规律。结果表明：井斜角为36°时岩屑临界启动速度最大，携岩最为困难；模型预测结果与实验结果吻合较好，且基于实例井的预测结果与现场作业情况一致，验证了所建模型的可靠性。成果可为大位移大井斜井及水平井井眼清洁提供理论依据和技术支持。 |
| 中文关键词:多分支水平井，岩屑运移，临界流速，井斜角，井眼清洁 |
| |
| Model and experimental research of cuttings transport in multi-branch horizontal wells |
|
|
| Abstract:With the technological development of multi-branch horizontal wells and complex structural wells, hole cleaning technology is facing new difficulties and challenges. The problems urgent to be resolved are how to solve the problem of cuttings-bed under complex geological conditions and complex well type conditions, in order to help judge and solve the complex situation downhole. The cuttings transport model is adopted based on the mechanism of cuttings transport. The indoor visualization of cuttings transport experiments was conducted to analyzed the cuttings transport patterns. The results show that the critical velocity of drill cutting is the highest at the well slope angle of 36°, and the drill cutting is most difficult to be carried. The trend of model predicted was validated by comparison with experimental results, and a good accordance was obtained. Its field application indicates also a good agreement between prediction and actual situations, which validated the reliability of this model. The model and experiments are of reference significance for borehole cleaning of large displacement horizontal wells. |
| keywords:multi-branch horizontal wells cuttings transport critical velocity well slope angle well bore cleaning |
| 查看/发表评论 下载PDF阅读器 |
