| 低温电镀复合片石油全面钻头的研制 |
| 修订日期：1998-07-05 点此下载全文 |
| 引用本文：李大佛,李天明,胡三虎,李宝坤,张志毅.低温电镀复合片石油全面钻头的研制[J].钻探工程,1999,(2):31-34.. Development of Low temperature Electroplated PDC Petroleom Rock Bits[J]. Drilling Engineering, 1999,(2):31-34. |
| 摘要点击次数: 1030 |
| 全文下载次数: 284 |
| 李大佛 李天明 胡三虎 李宝坤 张志毅 |
|
| 基金项目:地矿部“八五”科研项目 |
|
| 中文摘要:采用低温电镀工艺（室温）生产复合片石油全面钻头，或者说复合片镶嵌在钻头钢体上而形成完整的复合片石油全面钻头的整个生产过程中完全不受高温影响。因而最大限度地保护了复合片和金刚石，提高了钻头使用品质。现已获得较理想的经济指标，受到生产用户好评。 |
| 中文关键词:复合片,石油全面钻头,低温电镀,冲蚀,喷嘴 |
| |
| Development of Low temperature Electroplated PDC Petroleom Rock Bits |
| Li Dafo Li Tianming Hu Sanhu Li Baokun Zhang Zhiyi |
|
|
| Abstract:In the manufacturing process of PDC rock bits, PDC cutters of the bits will not be negatively affected by high temperature, so that better performance can be expected. This kind of bits has been well received by users. |
| keywords:PDC, petroleum rock bits, low temperature electroplating, erosion, nozzle |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
