| 锯切花岗石过程中金刚石承受载荷分析 |
| 点此下载全文 |
| 引用本文：于怡青,李远,徐西鹏.锯切花岗石过程中金刚石承受载荷分析[J].钻探工程,2001,(6):59-62.. Load Analysis on Diamond Grits in Circular Sawing during Cutting Granites[J]. Drilling Engineering, 2001,(6):59-62. |
| 摘要点击次数: 1050 |
| 全文下载次数: 399 |
| 于怡青 李远 徐西鹏 |
于怡青(华侨大学机电及自动化学院，福建泉州 362011)
李远(华侨大学机电及自动化学院，福建泉州 362011)
徐西鹏(华侨大学机电及自动化学院，福建泉州 362011)
|
| 基金项目:福建省自然科学基金项目(E0010027和E9810013) |
|
| 中文摘要:通过检测锯切水平力、垂直力以及功率消耗,研究了花岗石锯切过程中单颗磨粒承受的平均法向力特征,并探讨了节块中金刚石出露高度分布状态和锯切水槽对磨粒实际承受载荷的影响.研究结果对加工参数优化和金刚石工具设计具有参考价值. |
| 中文关键词:金刚石 花岗石 锯切 单颗磨粒承受力 |
| |
| Load Analysis on Diamond Grits in Circular Sawing during Cutting Granites |
| YU Yi qing LI Yuan XU Xi peng |
|
|
| Abstract:The average normal force per diamond grain is analyzed by measuring the horizontal and vertical force components and the power in circular sawing of granite with segmented diamond blade. The influences of diamond protrusion beyond bond matrix and the presence of coolant slots on the actual normal force per grain are discussed. The results presented in this paper can serve as a useful guideline for the selection of optimal machining parameters and optimal design of diamond tools. |
| keywords:diamond,granite,sawing,normal force per grain |
| 查看全文 查看/发表评论 下载PDF阅读器 |
