钻井过程中钻具吸附卡钻事故成因与处理技术
投稿时间：2004-07-19  修订日期：2004-07-19  点此下载全文
引用本文：卢予北,刘志国,程存平,等.钻井过程中钻具吸附卡钻事故成因与处理技术[J].钻探工程,2004,31(12):33-35.
LU Yu-bei,LIU Zhi-guo,CHENG Cun-ping,et al. Causes and Treatment of Adsorptive Sticking While Drilling[J]. Drilling Engineering, 2004,31(12):33-35.
摘要点击次数: 1182
全文下载次数: 414
作者单位E-mail
卢予北 河南省地勘局第二水文地质工程地质队 lu-yubei@263.net 
刘志国 河南省地勘局第二水文地质工程地质队  
程存平 河南省地勘局第二水文地质工程地质队  
吴青松 河南省地勘局第二水文地质工程地质队  
中文摘要:针对钻井过程中常遇的吸附卡钻事故，就其成因、产生条件及处理技术方法进行了较为详细的论述。结合工程实例对新研制的XS-1型解卡剂作用机理进行了分析、应用并提出了具体的操作规程和注意事项。
中文关键词:钻井  吸附卡钻  粘土层  套铣法  化学-物理法  XS-1型解卡剂
 
Causes and Treatment of Adsorptive Sticking While Drilling
Abstract:Being dead against the absorptive sticking of drilling pipes frequently encountering during drilling, the causes, conditions and technical treatments of the problems were discussed in details. The act mechanism of the newly developing sticking reliever XS-1 was analyzed. The operation rules and points for attention were put forward.
keywords:drilling  absorptive pipe sticking  clay  box milling  chemi-physical method  sticking reliever XS-1
查看全文  查看/发表评论  下载PDF阅读器