| PDC复合层厚度对金刚石钻头性能影响的现场试验分析 |
| 投稿时间：2004-04-16 点此下载全文 |
| 引用本文：周龙昌.PDC复合层厚度对金刚石钻头性能影响的现场试验分析[J].钻探工程,2004,31(12):48-49,52.ZHOU Long-chang. Field Experimental Research on the Influence of the PDC Composite Layer Thickness on the Properties of the Diamond Bit[J]. Drilling Engineering, 2004,31(12):48-49,52. |
| 摘要点击次数: 916 |
| 全文下载次数: 305 |
|
|
| 中文摘要:在PDC钻头切削齿磨损机理研究基础上，进行了现场试验。结果表明，PDC切削齿复合层厚度对金刚石钻头的寿命及机械钻速有较大影响，因而切削齿复合层厚度的选择在金刚石钻头优化设计中是非常重要的。 |
| 中文关键词:PDC 切削齿 复合层厚度 金刚石钻头 |
| |
| Field Experimental Research on the Influence of the PDC Composite Layer Thickness on the Properties of the Diamond Bit |
|
|
| Abstract:Basing on the abrasion principles of cutting teeth of the PDC bit a series of field experiments were made. The results show that the PDC composite layer thickness has great influence on the service life and drilling rate of a diamond bit. For a specified formation a optimism composite layer thickness may be found. And the composite layer thickness of the cutting teeth is a key factor for the optimism design of the diamond bit. |
| keywords:PDC cutting teeth composite layer diamond bit |
| 查看全文 查看/发表评论 下载PDF阅读器 |
