高压旋喷桩复合土钉墙Plaxis有限元分析 |
投稿时间:2009-03-12 修订日期:2009-03-12 点此下载全文 |
引用本文:郝峰.高压旋喷桩复合土钉墙Plaxis有限元分析[J].钻探工程,2009,36(9):52-55.HAO Feng. Plaxis Finite Elements Analysis on Supporting Structure with High-pressure Jet Grouting Pile and Composite Soil-nailing Wall[J]. Drilling Engineering, 2009,36(9):52-55. |
摘要点击次数: 1349 |
全文下载次数: 871 |
|
|
中文摘要:根据高压旋喷桩复合土钉墙研究现状,提出了有限元数值分析软件Plaxis8.2选择理由,论述了土体本构模型选择原则,支护结构材料模型选择原则,参数取值原则,分步计算过程原则。重点给出了高压旋喷桩、土钉、砼面层相关参数的计算公式。通过代表性的示例研究了高压旋喷桩贡献作用规律。最后通过基坑支护实例,介绍了该程序在高压旋喷桩复合土钉墙设计方面的应用和验证情况。 |
中文关键词:基坑支护 高压旋喷桩 复合土钉墙 有限元 |
|
Plaxis Finite Elements Analysis on Supporting Structure with High-pressure Jet Grouting Pile and Composite Soil-nailing Wall |
|
|
Abstract:According to the research status of supporting structure with high-pressure jet grouting pile and composite soil-nailing wall, the paper put forward the selection reason of finite element numerical analysis software Plaxis8.2; discussed selection principle for soil constitutive model and supporting structure material model, and principle for parameter values and step-by-step calculation process. The calculation formula of related parameters for high-pressure jet grouting pile, soil nail and concrete surface layer were mainly given. The paper also studied contribution function of high-pressure jet grouting pile based on representative case example, and introduced application and verification of the above procedure in the design of high-pressure jet grouting pile and composite soil-nailing wall by an engineering case of shopping mall excavation. |
keywords:excavation support high-pressure jet grouting pile composite soil-nailing wall finite element |
查看全文 查看/发表评论 下载PDF阅读器 |