高陡边坡堆积体锚固钻孔配套机具研究 |
投稿时间:2009-03-19 修订日期:2009-03-19 点此下载全文 |
引用本文:吴丽,余江洪,陈礼仪,等.高陡边坡堆积体锚固钻孔配套机具研究[J].钻探工程,2009,36(8):15-17.21.WU Li,YU Jiang-hong,CHEN Li-yi,et al. Research on the Drilling Matching Machines for Accumulation Body Anchoring at High-steep Slope[J]. Drilling Engineering, 2009,36(8):15-17.21. |
摘要点击次数: 1104 |
全文下载次数: 839 |
|
|
中文摘要:岩土工程中的高陡边坡堆积体的锚固工程中经常遇到的由于边坡高陡、钻机架设搬迁困难、底层破碎成孔困难等,有针对性地选用了相应的锚固钻机,并对钻机进行了改进,以使其更加符合高陡边坡堆积体锚索施工的要求;同时研制加工了符合该类地质情况的偏心跟管钻具。以期能够解决高陡边坡堆积体锚固成孔困难、效率低、造价高的难题。 |
中文关键词:高陡边坡 堆积体 锚固钻机 偏心跟管钻具 |
|
Research on the Drilling Matching Machines for Accumulation Body Anchoring at High-steep Slope |
|
|
Abstract:Because of high-steep slope, difficulties are often encountered, such as drilling rig relocation & erection and borehole completion in crushed bottom. Anchor drill was selected and improved in order to meet the requirements for the anchor cable construction in accumulation body at high-steep slope; and meanwhile eccentric drill with casing was developed and manufactured, hoping to solve the difficulties of anchoring borehole construction in accumulation body at high-steep slope, overcome low efficiency and high cost. |
keywords:high-steep slope accumulation body anchor drill eccentric drilling tools with casing |
查看全文 查看/发表评论 下载PDF阅读器 |