| 2010 m斜孔钻探设备选择及技术措施 |
| 投稿时间：2008-10-21 点此下载全文 |
| 引用本文：卢飞,李华,赵振峰,等.2010 m斜孔钻探设备选择及技术措施[J].钻探工程,2009,36(3):1-3.LU Fei,LI Hua,ZHAO Zhen-feng,et al. Equipment Selection and Technical Measures for 2010m Deep Slant Hole Drilling[J]. Drilling Engineering, 2009,36(3):1-3. |
| 摘要点击次数: 1187 |
| 全文下载次数: 939 |
|
|
| 中文摘要:辽宁省本溪市桥头镇大台沟铁矿普查工程项目，设计钻孔孔深2000 m，钻孔倾角85°～90°，终孔直径75 mm，如此深的斜孔，给钻探设备和钻探技术提出了高的要求。详细介绍了钻探设备材料的选择、设备的安装，以及主要钻探技术措施。 |
| 中文关键词:深孔 钻探 钻探设备 技术措施 节能 绳索取心钻进 |
| |
| Equipment Selection and Technical Measures for 2010m Deep Slant Hole Drilling |
|
|
| Abstract:In the survey of Dataigou iron mine of Benxi in Liaoning Province, hole depth was designed to be 2000m, inclination of borehole 85°～90°and hole termination diameter 75 mm. The paper introduced the completed engineering on the selection of drilling equipments and the auxiliary material, equipment installation and main technical measures in detail. |
| keywords:deep hole drilling drilling equipment technical measure energy-saving wire-line coring drilling |
| 查看全文 查看/发表评论 下载PDF阅读器 |
