| 球磨时间对铁基胎体显微结构和性能的影响 |
| 投稿时间：2011-11-01 修订日期：2012-02-28 点此下载全文 |
| 引用本文：沈立娜,李树辉,阮海龙,等.球磨时间对铁基胎体显微结构和性能的影响[J].钻探工程,2012,39(5):78-80.SHEN Li-na,LI Shu-hui,RUAN Hai-long,et al. Effect of Ball-milling Time on Microstructure and Properties of Fe-based Matrix Material[J]. Drilling Engineering, 2012,39(5):78-80. |
| 摘要点击次数: 1103 |
| 全文下载次数: 804 |
|
|
| 中文摘要:采用球磨法对铁基胎体粉末进行预处理，利用扫描电镜（SEM）、X射线衍射（XRD）以及洛氏硬度计、万能试验机等分析测试手段，系统研究了球磨时间对铁基胎体粉末显微结构以及烧结性能的影响。结果表明：随着球磨时间的增加，晶粒尺寸不断细化和均匀化。对于本文中所采用的铁基胎体粉末配方，存在一个最合理的球磨时间，此时，晶粒细化和团聚达到动态平衡，胎体材料的烧结性能达到最高。球磨时间继续延长，晶粒容易发生团聚，烧结性能有所降低。 |
| 中文关键词:球磨时间 铁基胎体 烧结性能 金刚石钻头 |
| |
| Effect of Ball-milling Time on Microstructure and Properties of Fe-based Matrix Material |
|
|
| Abstract:The Fe-based matrix powder preconditioning was prepared by ball-milling method. The effects of milling time on microstructure and sintering properties of the powder were systematically investigated by means of SEM, XRD, Rockwell hardness tester and universal testing machine. The results show that with the increase of the milling time, the micro-particles are well dispersed and uniformly distributed, and crystal size of powder is decreased continuously. When the milling time is up to a proper time, dynamic balance state forms between grain growth and grain size decrease, meanwhile sintering properties are the highest. When the milling time exceeds 12h, the sintering properties of the powder reduce, and the powder is easy to aggregate. |
| keywords:ball-milling time Fe-based matrix sintering properties diamond bit |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
