| TGLW220×660型冲洗液离心机转鼓的强度分析 |
| 投稿时间：2013-10-08 修订日期：2013-11-08 点此下载全文 |
| 引用本文：冯美贵,朱迪斯,翁炜,等.TGLW220×660型冲洗液离心机转鼓的强度分析[J].钻探工程,2014,41(3):41-43.FENG Mei-gui,ZHU Di-si,WENG Wei,et al. Analysis on the Strength of TGLW220×660 Flushing Fluid Centrifuge Drum[J]. Drilling Engineering, 2014,41(3):41-43. |
| 摘要点击次数: 1042 |
| 全文下载次数: 780 |
|
| 基金项目:中国地质调查局地质大调查项目“柴达木地区矿产勘查钻探工艺技术集成研究与示范”（12120113032600） |
|
| 中文摘要:对自行研制应用于地质钻探的TGLW220×660型冲洗液离心机的转鼓建立了三维实体模型，利用有限元分析软件对其在正常工况下的整体结构进行了三维有限元分析与模拟仿真。分析结果表明，离心机转鼓在正常工况下的强度满足要求；传统理论强度校核进一步验证了转鼓设计的合理性和安全可靠性，为TGLW220×660型冲洗液离心机在现场安全使用提供了重要的理论依据。 |
| 中文关键词:冲洗液 离心机 转鼓 三维有限元分析 仿真 强度校核 |
| |
| Analysis on the Strength of TGLW220×660 Flushing Fluid Centrifuge Drum |
|
|
| Abstract:3D entity model was set up for TGLW 220 660 flushing fluid centrifuge drum that is self-developed and used in geological drilling; using finite element analysis software, 3D finite element analysis and simulation were made on the whole structure of the drum under normal working conditions. The simulation analysis results show that the strength of the centrifuge drum under the normal working conditions can meet the construction requirements and the strength checking based on traditional theory further validates the rationality and reliability of rotary drum design, which provides the important theory basis for the safe use of TGLW 220 660 centrifuge in construction site. |
| keywords:flushing fluid centrifuge drum 3D finite element analysis simulation strength checking |
| 查看全文 查看/发表评论 下载PDF阅读器 |
