| 关于金刚石钻头胎体硬度分布的试验研究 |
| 投稿时间：2015-05-23 修订日期：2015-05-23 点此下载全文 |
| 引用本文：汤凤林,Чихоткин В.Ф.,彭莉,等.关于金刚石钻头胎体硬度分布的试验研究[J].钻探工程,2015,42(9):65-71.TANG Feng-lin,CHIKHOTKIN V.F.,PENG Li,et al. Experimental Research on Matrix Hardness of Impregnated Diamond Bit[J]. Drilling Engineering, 2015,42(9):65-71. |
| 摘要点击次数: 970 |
| 全文下载次数: 669 |
|
| 基金项目:江苏省江苏双创团队资助项目(编号：苏人才办[2014])27号) |
|
| 中文摘要:钻头胎体硬度是一项重要技术指标，应与所钻岩石的硬度（可钻性）和研磨性相适应。胎体硬度直接影响钻探技术经济指标的提高和钻进工艺参数的选择。试验研究表明，钻头胎体硬度分布很不均匀，差别很大。首先应从胎体烧结工艺上找原因，烧结压力偏小（5 MPa）可能是首要原因。钻头、工艺参数、操作技术等都很重要，缺一不可。钻进技术经济指标低，不一定都是钻头质量问题，要从多方面进行研究。提倡把经验打钻提高到科学打钻上来。 |
| 中文关键词:胎体硬度 金刚石钻头 技术经济指标 工艺参数 操作技术 烧结压力 试验研究 |
| |
| Experimental Research on Matrix Hardness of Impregnated Diamond Bit |
|
|
| Abstract:Matrix hardness is an important characteristic of diamond bit. It should be suitable for hardness (drillability) and abrasiveness of rock to be penetrated. Matrix hardness has direct influence on technical and economical indexes of drilling and choice of drilling parameters. Experimental research shows, that matrix hardness difference is big and not fairly well-distributed. The main reason of the big hardness difference may be low pressure (5 MPa) while sintering process of hot pressing. Diamond bit, drilling parameters and operation technology are all important. Probably low technical and economical results of diamond drilling are not connected with the bit, but with the drilling parameters and operation technology. Transition from drilling with experience to drilling with science is advocated. |
| keywords:matrix hardness diamond bit technical and economical indexes drilling parameters operation technology sintering pressure experimental research |
| 查看全文 查看/发表评论 下载PDF阅读器 |
