| 空气潜孔锤与风冷牙轮组合钻进在穿采空区大直径抽水孔中的应用 |
| 投稿时间：2016-01-12 修订日期：2016-06-15 点此下载全文 |
| 引用本文：陈平安,李源汇.空气潜孔锤与风冷牙轮组合钻进在穿采空区大直径抽水孔中的应用[J].钻探工程,2016,43(9):61-65.chenpingan,liyuanhui. Application of DTH Hammer and Air-cooled Roller Bit Combined Drilling Technology in Large Diameter Pumping Well Crossing Goaf[J]. Drilling Engineering, 2016,43(9):61-65. |
| 摘要点击次数: 1030 |
| 全文下载次数: 781 |
|
|
| 中文摘要:在穿多层采空区大直径抽水孔施工中，通过引入空气潜孔锤与风冷牙轮组合钻进工艺，解决了常规泥浆回转钻进钻遇多层采空区因孔内漏失无法成孔、空气潜孔锤钻进成孔孔径受限的问题。采用该工艺完成的2个φ550 mm抽水井工程均穿越4层采空区，φ350 mm潜孔锤冲击钻进平均钻速3.31 m/h，φ550 mm风冷牙轮扩孔钻进平均钻速2.27 m/h，在复杂地层中保持了较高的钻进效率，取得了明显的应用效果。介绍了该工艺在大同矿区φ550 mm大直径抽水井工程中的应用实例，经过实践验证了工艺的可行性，可为类似钻孔的施工提供参考。 |
| 中文关键词:空气潜孔锤 多层采空区 风冷牙轮 大直径抽水孔 |
| |
| Application of DTH Hammer and Air-cooled Roller Bit Combined Drilling Technology in Large Diameter Pumping Well Crossing Goaf |
|
|
| Abstract:During the construction of large diameter pumping well crossing multi-layer goaf, the leakage problem of conventional mud rotary drilling and the aperture limited problem of DTH hammer drilling were solved by introducing the DTH hammer and air-cooled roller bit combined drilling technology. The application of this technology in 2 φ550mm pumping wells crossing four-layer goaf indicates that the average drilling speeds of φ350mm DTH percussive drilling and φ550mm air-cooled roller bit reaming are 3.31m/h and 2.27m/h respectively. High drilling efficiency was kept in complex formation with obvious application effects. The paper introduces the application cases of φ550mm large diameter pumping well project in Datong mining area, the practice proves the feasibility of this technology, which can be provided for similar drilling construction. |
| keywords:air DTH hammer multi-layer goaf air-cooled roller bit large diameter pumping well |
| 查看全文 查看/发表评论 下载PDF阅读器 |
