| 陕西小秦岭金矿田深孔烧钻事故处理与分析 |
| 投稿时间：2016-03-15 修订日期：2016-04-19 点此下载全文 |
| 引用本文：沈星,戚波,赵大军,等.陕西小秦岭金矿田深孔烧钻事故处理与分析[J].钻探工程,2016,43(5):27-30.SHEN Xing,QI Bo,ZHAO Da-jun,et al. Treatment and Analysis on Bit Burning in Deep Hole Drilling of Shaanxi Xiaoqinling Gold Mine Area[J]. Drilling Engineering, 2016,43(5):27-30. |
| 摘要点击次数: 1075 |
| 全文下载次数: 860 |
|
| 基金项目:陕西省地质公益项目“陕西小秦岭金矿田成矿规律与深部成矿预测研究”（编号：20130302） |
|
| 中文摘要:小秦岭金矿田地区地质构造较为复杂，破碎漏失地层厚度大，该矿区钻探施工多次出现不同程度的烧钻事故，严重影响了钻探效率和钻探成本。针对Q8ZK801钻孔烧钻事故，通过反卸钻杆和磨铣事故钻具的方法，并配合加工的简易绳索打捞器、磨铣导正器进行处理，取得了良好效果，成功解决了烧钻事故。本文就该次事故发生的原因及事故处理方法做了详细的分析与总结，并对烧钻事故的预防进行探讨，为该矿区钻探施工提供参考，并为此类事故的处理提供借鉴。 |
| 中文关键词:深孔 烧钻事故 小秦岭矿区 |
| |
| Treatment and Analysis on Bit Burning in Deep Hole Drilling of Shaanxi Xiaoqinling Gold Mine Area |
|
|
| Abstract:The geological structure is very complex in Xiaoqinling area with thick crushed stratum. Different degrees of bit burning accidents often appear in the drilling construction in this area, which seriously affected the drilling efficiency and drilling cost. For bit burning accident in Q8ZK801, through the methods of reverse screwing the pipe and milling the drilling tools matched with processed simplified wire-line fishing tool and milling centralizer, the accidents have been successfully resolved with good effect. This paper analyzes and summarizes the accident causes and bit burning accident handling methods in detail and discusses the prevention to provide reference to mining area drilling. |
| keywords:deep hole bit burning Xiaoqinling mining area |
| 查看全文 查看/发表评论 下载PDF阅读器 |
