| 大雪山煤矿有线随钻定向钻进技术应用 |
| 投稿时间：2017-06-09 修订日期：2017-11-17 点此下载全文 |
| 引用本文：王宗友,乔生贵,陈刚,等.大雪山煤矿有线随钻定向钻进技术应用[J].钻探工程,2018,45(1):4-8.WANG Zong-you,QIAO Sheng-gui,CHEN Gang,et al. Application of Cabled Directional Drilling Technology in Daxueshan Coal Mine[J]. Drilling Engineering, 2018,45(1):4-8. |
| 摘要点击次数: 1426 |
| 全文下载次数: 920 |
|
| 基金项目:四川省国土资源厅矿产勘查项目“四川省珙县筠连矿区大雪山矿段（东段）煤矿普查”（编号 ：川国土\[2014\]494号） |
|
| 中文摘要:简述了四川省珙县筠连矿区大雪山矿段（东段）煤矿普查工程的概况、项目由来及定向孔设计。重点介绍了钻探施工定向钻进的技术路线、方案及技术要点，有线随钻定向钻进效果、经济效益、取得的成果。主要工作包括：配套XY-2000型立轴式液压钻机、BW-320/10型泥浆泵、HC绳索取心钻杆；采用ADST测斜仪，通缆水笼头有线随钻测量定向，螺杆马达孔底动力钻具造斜施工受控定向钻孔。在2个1000 m以深的钻孔中，共造斜29回次，总进尺7378 m。钻孔轨迹基本受控，达到了地质目的。施工中，探索了定向钻进螺杆钻具弯接头的角度选择、适宜绳索钻杆钻进的弯曲强度等问题。 |
| 中文关键词:有线随钻测斜 绳索钻杆 螺杆马达 定向钻进 弯曲强度 |
| |
| Application of Cabled Directional Drilling Technology in Daxueshan Coal Mine |
|
|
| Abstract:This paper briefly describes the general situation of coal mine survey project in Daxueshan mining block (in the east part) of Yunlian mining area in Sichuan, including the project background and the directional hole design; mainly introduces the technical route, program and technical points, as well as the drilling effects, economic benefits and achievements obtained by cabled directional drilling. With XY-2000 spindle type hydraulic drilling machine, BW-320/10 mud pump, HC wire line coring pipe, ADST inclinometer putting through the cable swivel for measuring while drilling, the controlled directional hole was constructed by whipstocking with screw motor BHA. In 2 ultra deep holes of more than 1000m in depth, the total footage was 7378m with 29 whipstockings. The drilling trajectory was basically controlled to reach the geological target. In the construction, the selection of the bent joint angle of screw drill tools for directional drilling and the decision of bending strength suitable to wire line drill pipe were explored. |
| keywords:cabled measurement while drilling wire line drill pipe screw motor directional drilling bending strength |
| 查看全文 查看/发表评论 下载PDF阅读器 |
