| 迁安市长城金矿Ⅰ号矿体帷幕注浆工程超硬地层的钻探施工方法 |
| 投稿时间：2018-12-20 修订日期：2019-04-09 点此下载全文 |
| 引用本文：卫强,陈伟武.迁安市长城金矿Ⅰ号矿体帷幕注浆工程超硬地层的钻探施工方法[J].钻探工程,2019,46(5):48-51.WEI Qiang,CHEN Weiwu. Drilling methods for ultra-hard stratum for the curtain groutingproject of No. Ⅰ ore body of Great Wall Gold Mine, Qian’an[J]. Drilling Engineering, 2019,46(5):48-51. |
| 摘要点击次数: 1050 |
| 全文下载次数: 604 |
|
|
| 中文摘要:迁安市长城金矿Ⅰ号矿体帷幕注浆工程是一大型的帷幕注浆项目，该矿区地质结构复杂，施工中帷幕钻孔钻遇白云岩超硬“打滑”地层，该地层钻进进尺缓慢，对项目工期影响很大，故在施工过程中针对该地层采用各种施工工艺进行试验，并以实际钻进过程中采集的钻头类型、钻进工艺及钻进参数等数据，分析得出一套最有效的钻探方法，为该地区日后矿区勘查、二期帷幕钻探施工提供参照依据。 |
| 中文关键词:迁安市长城金矿Ⅰ号矿体，帷幕注浆，超硬地层钻进，钻头类型、转速、磨料。 |
| |
| Drilling methods for ultra-hard stratum for the curtain groutingproject of No. Ⅰ ore body of Great Wall Gold Mine, Qian’an |
|
|
| Abstract:The curtain grouting project of No. I ore body of Great Wall Gold Mine in Qian’an is of a large-scale, and the geological structure of this mine area is complex. When curtain drilling entered the ultra-hard “slippery” dolomite stratum, the penetration rate became low, which greatly affected the construction schedule. Therefore, various construction technologies have been tested for this stratum in the drilling process, and with the analysis based on the data collected about drill bit types, drilling technologies and drilling parameters in the real drilling process, the most effective drilling methods have been established, which can provide good reference for future prospecting and the second stage curtain drilling project in this area. |
| keywords:No. Ⅰ ore body of Great Wall Gold Mine in Qian’an curtain grouting drilling in ultra-hard stratum bit type rotating speed grinding material |
| 查看全文 查看/发表评论 下载PDF阅读器 |
