| 枕头坝一级水电站堆积体深孔锚索成孔工艺试验与研究 |
| 投稿时间：2013-01-23 修订日期：2013-01-23 点此下载全文 |
| 引用本文：陈晓东,钟久安,刘栋全,等.枕头坝一级水电站堆积体深孔锚索成孔工艺试验与研究[J].钻探工程,2013,40(6):81-84.CHEN Xiao-dong,ZHONG Jiu-an,LIU Dong-quan,et al. Test and Research on Technology of Deep Hole Completion for Anchor Cable in Accumulation Body[J]. Drilling Engineering, 2013,40(6):81-84. |
| 摘要点击次数: 982 |
| 全文下载次数: 642 |
|
|
| 中文摘要:在深厚堆积体中锚索成孔困难，尤其是80 m以上锚索成孔的经验匮乏。为解决枕头坝一级水电站1号堆积体深孔锚索成孔难题，通过实验排除单层和双层套管成孔方法，选取单层套管与护壁灌浆相结合的施工工艺，实践证明，该工艺在工效、经济性方面效果较好，是解决堆积体深孔锚索造孔的有效途径。 |
| 中文关键词:堆积体 深孔锚索 跟管钻进 护壁灌浆 成孔工艺 水电站 |
| |
| Test and Research on Technology of Deep Hole Completion for Anchor Cable in Accumulation Body |
|
|
| Abstract:It is hard to complete a deep hole for anchor cable in thick accumulation body, especially for those with depth of more than 80 m. In Zhentouba first stage hydropower station, in order to complete the deep hole in 1# accumulation body, the combination of single layer casing and wall protection grouting was selected. The practice shows that this technology is effective to complete deep hole for anchor cable in accumulation body. |
| keywords:accumulation body deep hole anchor cable drilling with casing wall protection grouting hole completion technology hydropower station |
| 查看全文 查看/发表评论 下载PDF阅读器 |
