小口径勘探用可膨胀波纹管ANSYS模拟与实验分析 |
投稿时间:2014-09-24 修订日期:2014-09-24 点此下载全文 |
引用本文:陈晓君,宋刚,孟庆鸿,等.小口径勘探用可膨胀波纹管ANSYS模拟与实验分析[J].钻探工程,2014,41(11):37-40,45.CHEN Xiao-jun,SONG Gang,MENG Qing-hong,et al. ANSYS Simulation of Expandable Convoluted Tubing for Small Diameter Bore Prospecting and Experimental Analysis[J]. Drilling Engineering, 2014,41(11):37-40,45. |
摘要点击次数: 936 |
全文下载次数: 711 |
|
基金项目:国土资源部公益性行业科研专项项目“马坑矿区复杂地层膨胀管技术的应用研究”(201311059) |
|
中文摘要:可膨胀波纹管技术是通过对圆形管材进行特殊工艺处理,使管径发生变形以便其顺利通过井孔到达问题地层,然后通过液压膨胀复原,达到修井固井的目的。经过多年的技术发展,此技术已在石油工程中得到很多实践应用,但是在口径相对较小的地质勘探孔中,由于受口径以及工艺技术等限制,尚未有相关应用。主要针对材料编号为KP02的φ75 mm小口径梅花状可膨胀波纹管进行研究,通过利用ANSYS有限元软件进行模拟以及实验室实验,得到其膨胀变形参数并对其膨胀过程进行对比分析。 |
中文关键词:可膨胀波纹管 地质勘探 小口径钻孔 ANSYS模拟分析 |
|
ANSYS Simulation of Expandable Convoluted Tubing for Small Diameter Bore Prospecting and Experimental Analysis |
|
|
Abstract:Expandable convoluted tube technology is based on a special process on round tubing to make the tubing deformed so as to it can smoothly reach the trouble formation through the borehole; then by hydraulic expansion recovery, workover and cementing are realized. This technology has been used in petroleum engineering a lot after its many years’ development, but due to the confinement of the diameter and technology, it has not been applied in geological prospecting with smaller diameter. This paper presents the study that is mainly based on φ75mm small diameter quincuncial shape expandable convoluted tube being made of KP02 seamless steel tube, expansive transformation parameters are obtained by simulation with ANSYS finite element software and indoor experiments, and the contrast and analysis are made on the expanding process. |
keywords:expandable convoluted tubing geological prospecting small diameter bore ANSYS simulation analysis |
查看全文 查看/发表评论 下载PDF阅读器 |