浅海伸缩套管钻探工艺研究
投稿时间:2020-09-05  修订日期:2021-03-10  点此下载全文
引用本文:王林清,马汉臣,许本冲,等.浅海伸缩套管钻探工艺研究[J].钻探工程,2021,48(7):40-45.
WANG Linqing,MA Hanchen,XU Benchong,et al. Research on shallow sea drilling technology with telescopic casing[J]. Drilling Engineering, 2021,48(7):40-45.
摘要点击次数: 576
全文下载次数: 422
作者单位E-mail
王林清* 中国地质科学院勘探技术研究所河北 廊坊 065000
廊坊聚力勘探科技有限公司河北 廊坊 065000 
wanglinqingmail@163.com 
马汉臣 中国地质科学院勘探技术研究所河北 廊坊 065000  
许本冲 中国地质科学院勘探技术研究所河北 廊坊 065000
廊坊聚力勘探科技有限公司河北 廊坊 065000 
 
殷国乐 中国地质科学院勘探技术研究所河北 廊坊 065000  
陈浩文 中国地质科学院勘探技术研究所河北 廊坊 065000  
秦如雷 中国地质科学院勘探技术研究所河北 廊坊 065000  
卢秋平 中国地质调查局广州海洋地质调查局广东 广州 517000  
基金项目:中国地质调查局地质调查项目“深海钻探技术与工程支撑(中国地质科学院勘探技术研究所)”(编号:DD20190585);中国地质科学院勘探技术研究所科技项目“伸缩套管及配套工具研制”(编号:YB202010)
中文摘要:浅海取心钻探中钻遇易坍塌地层时,需要下放套管封隔地层,保证泥浆循环,换径继续钻进。现有常规下套管方法为使用带有钻台层甲板和套管层甲板的钻井船进行下放套管作业,部分无套管层甲板钻井船在遇到必须下套管的工况时,需临时搭建套管层平台进行下放套管作业,但受钻机和钻具体积及质量的限制。为解决无套管层甲板的钻井船在海洋钻探取心时需要下入套管的难题,设计了一种海洋钻探下入多层套管的工艺方法,利用可伸缩套管及相关设备,在海底井口与小型钻井船之间建立泥浆上返通道,封隔不稳定地层,实现泥浆回收循环及钻具升沉补偿。在钻井过程中,伸缩套管还可以起到导向定位的作用,防止潮差水流流速变化影响钻具下入,为浅海钻井节省时间和成本。
中文关键词:浅海钻探  伸缩套管  泥浆循环  升沉补偿  钻探工艺
 
Research on shallow sea drilling technology with telescopic casing
Abstract:When drilling into a stratum that is prone to collapse in shallow sea coring drilling, it is necessary to install casing to seal the stratum to ensure mud circulation and to continue drilling at smaller diameter. The conventional casing installation method is used to install casing from the drilling ship with both the drill floor platform deck and the casing platform deck; while for the drilling ships without the casing platform deck, it needs to be temporarily installed if casing must be installed. But installation of the casing platform is limited by the volume and mass of the drill rig and drill string. In order to solve the problem of installing casing in offshore drilling and coring with drilling ships without casing platform decks, a casing running process for installing multi-tier casing in offshore drilling is designed, where telescopic casing and related equipment is used to establish a mud return channel from the subsea wellhead to the small drilling ship to isolate unstable formations, and realize mud recycling and drilling heave compensation. In the drilling process, the telescopic casing can also provide guiding and positioning to prevent the drilling tool from influence of changes in tidal current flow speeds, saving time and cost for shallow sea drilling.
keywords:shallow sea drilling  telescopic casing  mud circulation  heave compensation  drilling technology
查看全文  查看/发表评论  下载PDF阅读器