| 博孜区块新型表孕镶金刚石全面钻头的研究与应用 |
| 投稿时间：2020-11-14 修订日期：2021-01-31 点此下载全文 |
| 引用本文：吴海霞,沈立娜,李春,等.博孜区块新型表孕镶金刚石全面钻头的研究与应用[J].钻探工程,2021,48(3):101-105.WU Haixia,SHEN Lina,LI Chun,et al. Research and application of the new surface impregnated diamond bit in the Bozi Block[J]. Drilling Engineering, 2021,48(3):101-105. |
| 摘要点击次数: 705 |
| 全文下载次数: 545 |
|
| 基金项目:自然资源部深部地质钻探技术重点实验室开放课题基金项目“深部地质钻探用孕镶金刚石钻头铁基切削齿研究”（编号：KF201903） |
|
| 中文摘要:针对塔里木油田博孜区块巨厚砾石层的岩性差异大、可钻性差、钻头机械效率低和使用寿命短的问题，本文从刀翼式结构、中心强化、表孕镶多级人造金刚石配方、分体烧结工艺等方面对配套高速涡轮钻具钻进的新型表孕镶金刚石全面钻头进行了设计与研究。研制的?333 mm表孕镶金刚石全面钻头在博孜区块进行现场应用，钻头的平均机械钻速2.01 m/h，寿命300 m，与进口孕镶金刚石全面钻头相当，但成本远低于进口钻头，大幅度提高了该地层勘探开发的施工效率，降低了勘探成本。 |
| 中文关键词:高速涡轮钻具 巨厚砾石层 孕镶金刚石钻头 |
| |
| Research and application of the new surface impregnated diamond bit in the Bozi Block |
|
|
| Abstract:In view of greatly heterogeneous lithology， poor drillability， low mechanical drilling efficiency and short service life of the bit in the massive gravel layer of the Bozi Block， Tarim Oilfield， a new surface impregnated diamond bit for the high-speed turbodrill is designed and studied from the aspects of the blade structure， central strengthening， multi-stage surface impregnated synthetic diamond formula and separate sintering process. The average ROP of the bit is 2.01m/h with the service life up to 300m， which is equivalent to that of the imported impregnated diamond bit， while the cost is far lower than that of the imported bit. The new bit greatly improves the construction efficiency of exploration and development of the formation and reduces the exploration cost. |
| keywords:high speed turbodrill massive gravel layer surface impregnated diamond bit |
| 查看全文 查看/发表评论 下载PDF阅读器 |
