雄安新区D05井燧石白云岩地层钻头应用探索
投稿时间:2023-01-03  修订日期:2023-03-27  点此下载全文
引用本文:王勇军,梁伟,杜志强,等.雄安新区D05井燧石白云岩地层钻头应用探索[J].钻探工程,2023,50(4):142-148.
WANG Yongjun,LIANG Wei,DU Zhiqiang,et al. Exploration of drill bit applied in chert dolomite strata in Well D05 of Xiong’an New Area[J]. Drilling Engineering, 2023,50(4):142-148.
摘要点击次数: 1164
全文下载次数: 639
作者单位E-mail
王勇军 山东省地质矿产勘查开发局第二水文地质工程地质大队(山东省鲁北地质工程勘察院)山东 德州 253072
山东省地热清洁能源探测开发与回灌工程技术研究中心山东 德州 253072 
wyjcd511@sina.com 
梁伟* 山东省地质矿产勘查开发局第二水文地质工程地质大队(山东省鲁北地质工程勘察院)山东 德州 253072
山东省地热清洁能源探测开发与回灌工程技术研究中心山东 德州 253072 
21483126@qq.com 
杜志强 山东省德水新能源有限公司山东 德州 253072  
王磊 山东省德水新能源有限公司山东 德州 253072  
张涛 山东省地质矿产勘查开发局第二水文地质工程地质大队(山东省鲁北地质工程勘察院)山东 德州 253072
山东省地热清洁能源探测开发与回灌工程技术研究中心山东 德州 253072 
 
佟铮 山东省地质矿产勘查开发局第二水文地质工程地质大队(山东省鲁北地质工程勘察院)山东 德州 253072
山东省地热清洁能源探测开发与回灌工程技术研究中心山东 德州 253072 
 
基金项目:中国地质调查局地质调查项目“天津东丽区—河北牛驼镇地热资源调查与试验”(编号:DD20190127);山东省地矿局地质勘查和科技创新项目“大口径深部钻探钻完井技术研究”(编号:KY201946);山东省地矿局地质勘查引领示范与科技攻关项目“高温地热超深孔勘查取心钻探关键技术研究与应用”(编号:KY202219)
中文摘要:D05井是雄安新区一眼地热勘探井,完钻井深4014.42 m,揭露了雾迷山组和高于庄组两个热储层。在高于庄组石英含量较高的燧石白云岩地层钻进中,出现了钻头严重磨损、钻头使用寿命短的状况。为解决钻探施工中的难题,进行了钻头应用探索,通过分析研究、实践应用优化,探索出了一种适宜于石英含量较高的燧石白云岩地层?215.9 mm井径使用的牙轮钻头,平衡了钻头磨损和钻进效率方面的难题。使用该型号钻头顺利地完成了D05井三开?215.9 mm孔径钻探施工任务。通过本次钻头应用探索,为类似地层钻头应用提供了参考方案,丰富了深部地热钻探工艺技术,为深部地热钻探的发展提供了技术支撑。
中文关键词:燧石白云岩  钻头磨损  使用寿命  硬质合金齿  地热井
 
Exploration of drill bit applied in chert dolomite strata in Well D05 of Xiong’an New Area
Abstract:Well D05 is a geothermal exploration well in Xiong’an New Area with the total depth of 4014.42 m, and two thermal reservoirs were revealed named Wumishan Formation and Gaoyuzhuang Formation. The situation of serious wear and short service life of bit appeared when drilling in the quartz-rich chert dolomite strata in Gaoyuzhuang Formation. Therefore, the exploration of drill bit was made through the analytical study and practice optimization. As a result, a kind of cone bit suitable for ?215.9mm well diameter in quartz-rich chert dolomite strata was explored, and the problem of bit wear and drilling efficiency were balanced. The drilling task of ?215.9mm well diameter in the third spud of Well D05 was completed smoothly by the use of this bit. The successful application provides a reference scheme for bit usage in similar strata, enriches the deep geothermal drilling technology and provides technical support for the development of deep geothermal drilling.
keywords:chert dolomite strata  drill bit wear  service life  carbide drilling bit  geothermal well
查看全文  查看/发表评论  下载PDF阅读器