旋冲螺杆钻具在硬岩地热钻探中的应用研究 |
投稿时间:2023-04-23 修订日期:2023-06-07 点此下载全文 |
引用本文:王勇军,刘刚,佟铮,等.旋冲螺杆钻具在硬岩地热钻探中的应用研究[J].钻探工程,2023,50(5):146-152.WANG Yongjun,LIU Gang,TONG Zheng,et al. Application study of rotary-percussive screw drilling tool in hard-rock geothermal drilling[J]. Drilling Engineering, 2023,50(5):146-152. |
摘要点击次数: 157 |
全文下载次数: 490 |
|
基金项目:山东省地质勘查引领示范与科技攻关项目“高温地热超深孔勘查取心钻探关键技术研究与应用”(编号:KY202219) |
|
中文摘要:针对目前地热钻探中,在花岗岩、片麻岩等硬岩地层中机械钻速低的问题,引入一种机械式旋冲螺杆钻具,先后在JHR-1井花岗岩地层及HG-1井片麻岩地层中进行了试验应用。与普通螺杆钻具相比,旋冲螺杆钻具在JHR-1井?215.9 mm井段、HG-1井?215.9 mm井段和?311.2 mm井段机械钻速分别提高了10%、8.4%和7.6%,同时,旋冲螺杆钻具使用过程中未产生其他副作用。试验证明使用旋冲螺杆钻具可以有效地提高花岗岩、片麻岩等硬岩地层的机械钻速,为旋冲螺杆钻具在硬岩地层地热钻探中的应用推广打下了基础。 |
中文关键词:旋冲螺杆钻具 冲击碎岩 硬岩地层 机械钻速 地热钻探 |
|
Application study of rotary-percussive screw drilling tool in hard-rock geothermal drilling |
|
|
Abstract:In view of the problem of low mechanical drilling speed in the hard rock such as granite and gneiss in the geothermal drilling at present, a mechanical rotary-percussive screw drilling tool is introduced and tested in granite formation of JHR-1 well and gneiss formation of HG-1 well. Compared with the ordinary screw drilling tool, the mechanical drilling speed of the rotary-percussive screw drilling tool increases respectively by 10%, 8.4% and 7.6% in ?215.9 mm well section of JHR-1, ?215.9 mm and ?311.2mm well section of HG-1, and no other side effects exist during the drilling process. The test proves that the mechanical drilling speed can be effectively improved by the use of rotary-percussive screw drilling tool, which provides a foundation for the application and popularization of the rotary-percussive screw drilling tool in the drilling of hard rock such as granite and gneiss. |
keywords:rotary-percussive screw drilling tool impact broken rock hard rock formation mechanical drilling speed geothermal drilling |
查看全文 查看/发表评论 下载PDF阅读器 |