白云质泥岩水平井分段压裂工艺应用 |
投稿时间:2012-07-31 点此下载全文 |
引用本文:银本才,张建涛,肖兵,等.白云质泥岩水平井分段压裂工艺应用[J].钻探工程,2012,39(Z1):41-43.YIN Ben-cai,ZHANG Jian-tao,XIAO Bing,et al. The Application of Section Fracturing Technology in Dolomitic Mudstone Horizontal Well[J]. Drilling Engineering, 2012,39(Z1):41-43. |
摘要点击次数: 857 |
全文下载次数: 224 |
|
|
中文摘要:中原油田濮城油区部分井层岩性类型以白云质泥岩为主,微裂缝及孔洞发育,但总体上孔渗性较差,经分析认为剩余油潜力较大,决定对水平井濮1-FP1井进行分段压裂改造。通过对储层物性研究、测试压裂分析及压裂软件模拟进行压裂参数优化,确定了适合该井的分段压裂施工参数,优选了压裂液和支撑剂,成功地完成了十段压裂施工,注入总液量2975 m3,加入支撑剂308 m3,压后取得了一定的增产效果。该井多段压裂工艺的成功应用为下一步该区块白云质泥岩储层的压裂改造提供了依据和施工经验。 |
中文关键词:白云质泥岩 裸眼封隔器 分段压裂 现场应用 |
|
The Application of Section Fracturing Technology in Dolomitic Mudstone Horizontal Well |
|
|
Abstract:Some reservoir in the area of Pucheng in zhongyuan oilfield is dolomitic mudstone with mangy microfracture and pore space,but its permeability and porosity are very low.Considering its huge remaining oil potential,it is determined to implement multistage hydraulic fracturing at P1-FP1 well.Through that we studyed reservoir quality,analysed the minifrac and optimized fracturing parameters by fracturing software to acquire the appropriate fracturing operation parameters,and selected the optimal fluid and proppant.It has been successfully completed on the field,and a total of 2975 m3 fluid was pumped down into the hole with 308 m3 proppant added,and it obtained a certain effect after fracturing.The successful application will provide the technical basis and operation experience for the fracturing of the dolomitic mudstone reservoir. |
keywords:dolomitic mudstone open hole packer multistage fracturing field application |
查看全文 查看/发表评论 下载PDF阅读器 |