中国地质工程公司上海公司,中国地质工程公司上海公司,同济大学建筑设计研究院〈集团〉有限公司
China Geo-engineering Corporation Shanghai,China Geo-engineering Corporation Shanghai,Tongji Architectural Design 〈Group〉 Co., Ltd.
- 摘要 | |
- 访问统计 |
- 参考文献 [5] |
- 相似文献 [20] | | |
- 文章评论
理论分析、探讨了上海地区钻孔灌注桩的最小极限施工直径。通过φ400 mm钻孔灌注桩施工实例，探讨直径＜550 mm的钻孔灌注桩的施工技术措施和质量保证措施，并探讨更小直径钻孔灌注桩设计施工的可能性。
The smallest diameter limit for bored grouting pile construction in Shanghai area is analyzed theoretically and discussed. By a construction case of a bore grouting pile with the diameter of 400 mm, the discussion is made on the measures of construction technologies and quality assurance for the bore grouting pile with the diameter less than 550 mm, and the possibility of the design and construction for bore grouting pile with even smaller diameter is also explored.
引用本文
黄建生,赖都成,王忠平.上海地区φ550 mm以下小直径钻孔灌注桩施工探索[J].钻探工程,2013,40(12):74-77.
HUANG Jian-sheng, LAI Du-cheng, WANG Zhong-ping. Discussion on Construction of Bored Grouting Pile with Diameter Less than 500mm in Shanghai Area[J]. Drilling Engineering, 2013,40(12):74-77.
文章指标
- 点击次数:889
- 下载次数: 952
- HTML阅读次数: 196
历史
- 收稿日期:2013-06-06
- 最后修改日期:2013-12-01
- 录用日期:2013-10-10
- 在线发布日期: 2014-01-02
文章二维码
