6/12/2025, 6:56:33 PM 星期四
煤层气井造穴射流破岩试验研究
作者:
作者单位:

中煤科工集团西安研究院有限公司

中图分类号:

P634

基金项目:

中煤科工集团有限公司创新基金项目“ 极短半径直井侧钻煤层气井开发技术与装备 ”(编号:2015ZD005);中煤科工集团西安研究院有限公司科技创新基金项目“煤层气TRD煤层气增产技术与装备研究 ”(编号:2014ZD017)


Experimental Study on Rock Breaking by Water Jet for Cavity Building in Coal Bed Methane Well
Author:
Affiliation:

Xi’an Research Institute, China Coal Technology and Engineering Group

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [20]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    通过水射流造穴进行洞穴完井是煤层气井重要的完井方式。为了优选造穴射流工具的喷嘴,提高射流造穴直径和效率,通过制备相似煤岩试样,采用室内试验的方法,进行了连续射流和空化射流的破岩效果试验,并在现场造穴施工中进行了应用。结果表明:自由射流条件下,连续射流在喷距为200 mm时破岩效果最好,空化射流在喷距为300 mm时破岩效果最好。淹没射流条件下,连续射流未能冲蚀煤岩试样;空化射流的冲蚀直径则呈先增加后减小并趋于稳定的状态,在淹没深度为200 mm时冲蚀直径达到最大,冲蚀深度随着淹没深度的增加而增加,在淹没深度为300 mm以后,冲蚀深度趋于稳定缓慢减小。研究结果为造穴射流工具的喷嘴选型及结构优化设计提供了依据。

    Abstract:

    The cavity building by water jet is the important way of coal bed methane well completion. In order to optimize the nozzle for water jet tools to enlarge cavity diameter and improve cavity building efficiency, the similar coal samples were prepared, rock breaking effects were tested by continuous jet and cavitating jet in laboratory and the application was carried out in the field. The results showed that under the condition of free jet, the best rock breaking effects were at jet distance of 200mm and 300mm for continuous jet and cavitating jet respectively. Under the condition of submerged jet, the continuous jet could not erode the coal sample; the eroding diameter of cavitating jet increased first, then decreased tending to be stable; and when the submerged depth was 200mm, the eroding diameter reached the maximum. The eroding depth increased with the increase of submerged depth; by the submerged depth of 300mm, the eroding depth was tending to be stable and decreased slowly. This research provides the basis for nozzle selection and optical design of water jet tools.

    参考文献
    [1] 莫日和.煤层气井造穴技术的实践与研究[J].中国煤层气,2007,4(3):35-37,42.
    [2] 蒋海涛,周俊然,董颖,等.煤层气井复合造穴技术研究及应用[J].中国煤层气,2011,8( 6) : 42- 45.
    [3] Palmer I. Coalbed methane completions: a world view. International Journal of Coal Geology. 2010, 82: 184-195.
    [4] 马永峰.美国西部盆地煤层气钻井和完井技术 [J].石油钻采工艺,2003,25 ( 4) : 32 -34.
    [5] 万继方,申瑞臣,陈添.煤层气井造洞穴技术特点分析[J].重庆科技学院学报,2015,17(2):73-75,84.
    [6] 李源,周伟,刘昆.空气动力造穴工艺在石门揭煤钻井中的应用[J].煤矿安全,2015,46(12):123-124.
    [7] 段明星,高德利,张辉,等.煤层气井空气动力洞穴完井力学机理研究[C]/ /2008 年煤层气学术研讨会论文集.北京:地质出版社,2008: 282.
    [8] 熊德华,王珊珊.煤层气井空气动力造穴工艺的实践与认识[J].中国煤炭地质,2010,22( 10) : 26 -27,61.
    [9] 倪红坚.高压水射流破岩机理的数值模拟研究 [ D] 山东东营:石油大学(华东)石油工程学院,2002.
    [10] 王瑞和,倪红坚.高压水射流破岩钻孔过程的理论研究[J].中国石油大学学报(自然科学版),2003,27( 4) : 44-47.
    [11] 程大中.高压水射流与机械刀具结合破岩初步试验总结[J].高压水射流,1982,17( 2):1-13.
    [12] 田和金,李璗,王爱华,等.岩石动力学试验及其在油 田开发中的应用[J].岩石力学与工程学报,2000,19 ( 增刊):889 -894.
    [13] 倪红坚.高压水射流破岩机理的数值模拟研究 [ D].山东东营:石油大学(华东)石油工程学院,2002.
    [14] 倪红坚,王瑞和.脉冲射流破岩规律的数值试验 [J].石油钻探技术 , 2002, 30 ( 6) : 15-17.
    [15] 倪红坚,王瑞和.脉冲水射流破岩的数值模拟研究 [ J]. 石油钻探技术 , 2001, 29 ( 5), 12-14.
    [16] 王瑞和, 倪红坚. 旋转水射流破岩机理的数值模拟分析[ J].石油大学学报(自然科学版), 2003, 27 ( 1): 33-35.
    [17] 徐依吉.超高压水射流理论与应用基础研究[D].成都:西南石油大学石油工程学院,2004.
    [18] 向文英.淹没射流中磨料与空泡的相互关系研究[D].重庆:重庆大学环境科学学院,2007.
    [19] 李根生,史怀忠,沈忠厚,等.水力脉冲空化射流钻井机理与试验[J].石油勘探与开发,2008,35(2):239-243.
    [20] 卢义玉,李晓红,向文英. 空化水射流破碎岩石的机理研究[J].岩土力学,2005,26(8):1233-1237.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

王力.煤层气井造穴射流破岩试验研究[J].钻探工程,2016,43(8):1-5.
WANG Li. Experimental Study on Rock Breaking by Water Jet for Cavity Building in Coal Bed Methane Well[J]. Drilling Engineering, 2016,43(8):1-5.

复制
分享
文章指标
  • 点击次数:1016
  • 下载次数: 1012
  • HTML阅读次数: 213
  • 引用次数: 0
历史
  • 收稿日期:2016-05-16
  • 最后修改日期:2016-06-15
  • 录用日期:2016-06-20
  • 在线发布日期: 2016-10-28
文章二维码