6/23/2025, 12:56:08 AM 星期一
Home > Archive>Volume 43, Issue 9, 2016 >52-55
PDF HTML XML Export Cite reminder
Optimization and Application of Bit in Gucheng Region of Daqing
Author:
Affiliation:

Drilling Engineering and Technology Research Institute of Daqing Drilling and Exploration Engineering Company,Drilling Engineering and Technology Research Institute of Daqing Drilling and Exploration Engineering Company,Drilling Engineering and Technology Research Institute of Daqing Drilling and Exploration Engineering Company,Drilling Engineering and Technology Research Institute of Daqing Drilling and Exploration Engineering Company,Drilling Engineering and Technology Research Institute of Daqing Drilling and Exploration Engineering Company

  • Article
    • | |
  • Metrics
    • |
  • Reference [9]
    • |
  • Related [20]
    • |
  • Cited by [0]
    • | |
  • Comments
    Abstract:

    Poor drilling efficiency in deep formation and serious bit wearing are caused by gravel-containing formation, hard rock and roller cone drilling for more than 85% of the well sections in Gucheng region of Tadong block of Daching. Based on the traditional drilling speed prediction method, the calculation method of rock breaking efficiency is established by introducing the related parameters of bit wearing, formation lithology, well depth and so on, and based on the formation lithology, logging data and drill bit types, the optimization model of drill bit is set up to realize quantitative bit selection, bit series recommendations suitable for Gucheng region is put forward, which was successfully applied in 5 wells, the footage of single bit and the average penetration rate have been greatly improved, the bit optimization provides technical basis for efficient drilling construction in Gucheng region.

    Reference
    [1] 杨进,高德利,刘书杰,等. 测井资料在钻头选型方面的应用[J].石油大学学报(自然科学版),1998,22(2):29-31.
    [2] 张辉,高德利.钻头选型通用方法研究[J].石油大学学报(自然科学版),2005,29(6):45-49.
    [3] 梁涛,赵义. 金3井混镶金刚石钻头的设计与应用[J].探矿工程,2014,41(2):45-47.
    [4] 纪明师,张富成,张庆华,等. 砂砾岩地层钻头合理选型研究及应用[J].石油钻采工艺,2005,27(3):13-14.
    [5] 路小帅,王越之,雷满,等. 利用数理统计方法对钻头进行优选及评价[J].断块油气田,2007,14(6):63-65.
    [6] 周祥林,张进双,王磊. 麦盖提区块钻井关键技术研究及应用[J]. 探矿工程,2015,42(3):1-5.
    [7] 王国庆,王建波,陈广,等. 焦页非常规页岩气井优快钻井技术[J]. 探矿工程,2014,41(10):17-21.
    [8] 闫永辉. 鄂北地区钻头优选探讨[J]. 探矿工程,2005,4:40-41.
    [9] 蒋晓红,王坤,李果,等. 四川气田GM区块钻头优选评价[J].石油地质与工程,2014,28(6):98-100.
    Comments
    Comments
    分享到微博
    Submit
Get Citation

Copy
Share
Article Metrics
  • Abstract:1005
  • PDF: 983
  • HTML: 247
  • Cited by: 0
History
  • Received:November 12,2015
  • Revised:July 01,2016
  • Adopted:July 11,2016
  • Online: October 31,2016
Article QR Code
Today's visits：2162 Total visits：415669   津ICP备19010518号-1  

津公网安备12011002024030号
Address：No.77 Jinguang District, Langfang City, Hebei Province Post Code：065000 Phone：0316-2096324
URL：http://www.tkgc.net/ E-mail：tkgc@mail.cgs.gov.cn
Drilling Engineering ® 2025 All Rights ReservedSupported by:Beijing E-Tiller Technology Development Co., Ltd.