Finite element numerical simulation analysis of packer-type expansion pipe
DOI:
Author:
Affiliation:

1.Langfang Natural Resources Comprehensive Survey Center, China Geological Survey;2.中国地质调查局廊坊自然资源综合调查中心;3.Hydrogeological environmental geological survey Center, China Geological Survey;4.College of Mechanical and Equipment Engineering, Hebei University of Technology

Clc Number:

PE931.2

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The packer expansion tube technology has been developed for the hydrogeological exploration of wall protection and the repair of damaged well pipes. It has the characteristics of low cost and simple process. In order to make the packer meet the requirements of the expansion pipe, the expansion mechanism of the packer is improved. The packer is used to test the pipes with different properties. According to the test results, 316L stainless steel is selected as the expansion pipe. In order to study the relationship between the expansion pressure and the change of the length and thickness of the expansion tube during the two expansions of the packer-type expansion tube, the expansion process of the expansion tube with Φ219 mm and wall thickness of 4 mm was numerically simulated by Abaqus software to obtain the change of stress and strain during the expansion process, and field tests were conducted on the expansion tube with the same specifications. Then comparing the simulation results with the test results, it is concluded that the simulation results are basically the same as the actual demonstration results, indicating that the numerical simulation results can be used as a reference for the actual construction.

    Reference
    Related
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:May 21,2024
  • Revised:June 24,2024
  • Adopted:July 04,2024
  • Online:
  • Published: